How To Set Alarm On Ihome Clock

iHome iBT235 Powerclock Bluetooth Alarm Clock

FEATURES & FUNCTIONS

Height PANEL

CLOCK DISPLAY

Back Panel

GETTING STARTED

Step One

Connecting the Unit
Connect the included Air-conditioning adapter to the DC jack located on the dorsum of the unit of measurement and connect the other end to a working wall outlet.

Stride Two

Setting Your Clock

Printing and hold the Time Fix Button until the display ﬂashes.
Press the – or + Buttons to accommodate selections and press Fourth dimension Fix to conﬁrm. (Make sure to set correct AM/PM time.)
Do this for time, year, month and date.
All done!

Daylight Savings Time (DST) Switch: By default, the DST Switch is prepare to Auto and will automatically adjust the fourth dimension twice a year.

To toggle the clock brandish between 12/24 60 minutes time, press Alarm i or Alarm ii while the display is flashing during fourth dimension setting.

Stride Three

Connecting to Bluetooth

Ensure your device'southward Bluetooth is activated.
Press and concord the Bluetooth Pairing Button on the iBT235 for 2 seconds to enter pairing manner.
Select 'iHome iBT235' on your device's Bluetooth menu to connect!

SETTING THE Alarm

This unit of measurement features dual alarms which tin can be set to unlike times and alarm sources. Each is set in the same mode. Instructions are given every bit 'Alarm Button' – press Warning 1 or Alert ii to set respective alarms.

Press and hold the Alarm Push for two seconds until the alert time display and alarm icon ﬂash.
Press the – or + Buttons to conform the alarm time (agree for rapid setting). Make sure you set up the correct AM/PM alarm fourth dimension. The PM indicator appears to the left of the time display. (In that location is no AM indicator.)
Press the Alarm Button to conﬁrm the alert fourth dimension setting. Press the – or + Buttons to ready the desired alarm schedule: 7 Days (every day), 5 Days (week days only) or 2 Days (weekends merely).
Press the Warning Button to conﬁrm the alarm schedule. Press the – or + Buttons to select the desired wake to alarm source: Wake to Bluetooth: Wake to a linked Bluetooth device.
(Note: Be sure to adjust the volume on your Bluetooth device.) Wake to Tone: Printing the Alarm Push button to conﬁrm. Press the – or + Buttons to select one of four tones.
Printing the Alarm Button to conﬁrm the alarm source.
Printing the – or + Buttons to accommodate the alert volume.
Press the Alarm Push button to conﬁrm settings. The corresponding Warning Indicator (ane or 2) will appear on the display to conﬁrm the alert is armed.

TURNING THE Warning ON/OFF

Press the Alarm Button to preview the alarm time. Press again toggle the alert ON and OFF, indicated by the related LED indicator.
When the alarm sounds, printing the corresponding Alarm Button (1 or 2) or the Alarm Reset Button to disable the alarm and reset information technology for the next day.

SNOOZE/Display DIMMER

Snooze: When the alarm is sounding, press the Snooze/Dimmer Button to snooze (default is 9 minutes).
Dimmer: Press the Snooze/Dimmer Push (when alarm is Non sounding) to adjust brandish brightness.

PROGRAMMABLE SNOOZE

Prepare the elapsing of your snooze timer:

To program Snooze, press and hold the Snooze/Dimmer Button for 2 seconds during normal operation (when no alarm is sounding).
Printing the – or + Buttons to select the desired snooze time (betwixt ane and 29 minutes).
Press the Snooze/Dimmer Button to conﬁrm setting. You can snooze the alarm repeatedly for up to i hour.

SLEEP TIMER

This unit allows you to sleep to the current sound source for a set time before turning the unit off. The Slumber Manner icon volition appear on the display when timer is active.

To gear up Sleep time, press the Slumber Push as needed to bike to the desired sleep duration: 120, 90, threescore, thirty or 15 minutes or OFF (turns the unit of measurement off). Press and release the Sleep Push button during sleep mode to review remaining slumber time.
Press the – or + Buttons to adjust the sleep volume on the unit. Note that the sleep volume setting is stored separately from other volume settings.

USB CHARGING

Connect a USB cable (not included) to i of the two USB ports located on the back of the unit to accuse devices.
(Make certain the unit is plugged into a ability outlet.)

Bombardment Redundancy

The unit comes with a CR2450 battery to maintain alarm and clock settings during a temporary power failure. When the low battery icon appears on the clock display, it is fourth dimension to supplant the back-up battery. The battery compartment is located on the back of the unit of measurement.

Make sure the AC adapter is continued, or you will lose your clock settings during battery replacement.
Utilise a Phillips screwdriver to unscrew the battery compartment door.
Remove the wearied bombardment and insert a new CR2450 battery. Supplant the compartment door. Practise not overtighten the screw.

BATTERY USE CAUTIONS AND TIPS

Only use the recommended/supplied batteries or equivalent.
Use alkaline batteries for longer life.
Insert batteries with proper polarity (+/–) as indicated.
Remove exhausted batteries from production.
Recharge rechargeable batteries under developed supervision.
Do non attempt to recharge non-rechargeable batteries.
Practise non open batteries or oestrus them beyond normal ambient temperatures.
To prevent bombardment leakage or damage remove batteries from a product if it will not exist used for a month or longer.
Use extreme caution handling leaking batteries (avoid direct contact with eyes and skin). If battery leakage comes in contact with eyes, IMMEDIATELY ﬂush the eye with lukewarm and gently ﬂowing h2o for at least 30 minutes. If skin contact occurs, wash skin with clear water for at to the lowest degree 15 minutes. Seek medical attention if any symptoms occur.
Store in cool, dry, ventilated area abroad from chancy or flammable material.
Follow applicable laws and local regulations for the disposal of batteries.

Important SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper utilize can result in potential electrical shock or ﬁre hazards. Please read and follow all condom and operating instructions advisedly before installation and use, and go along these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.

Water and Moisture – The unit should not be used most h2o. For instance: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
Ventilation – The unit of measurement should be situated so that its location or position does non interfere with its proper ventilation. For instance, it should not be situated on a bed, sofa, rug or like surface that may block ventilation openings. As well, it should not exist placed in a congenital-in installation, such equally a bookcase or cabinet, which may impede the ﬂow of air through the ventilation openings.
Heat – The unit should exist situated abroad from heat sources such equally radiators, heat registers, stoves or other appliances (including ampliﬁers) that produce heat.
Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Simply utilize the AC adapter that came with the unit of measurement.
Power-Cable Protection – Power supply cables should be routed so that they are non likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cablevision exits the unit of measurement to where information technology is plugged into an Air conditioning socket.
Cleaning – The unit should be cleaned but equally recommended. See the Maintenance section for cleaning instructions.
Objects and Liquid Entry – Care should exist taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.
Attachments – Do not use attachments non recommended by the product manufacturer.
Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This volition foreclose damage to the product due to lightning and power-line surges.
Damage Requiring Service – The unit should be serviced by qualiﬁed service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to pelting.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
Periods of Nonuse – If the unit is to be left unused for an extended period of fourth dimension, such as a month or longer, remove batteries before storage
Servicing – The user should not attempt to service the unit across those methods described in the user manual. Service methods not covered in the operating instructions should be referred to qualiﬁed service personnel.
Magnetic Interference: This product'due south speakers contain powerful magnets which could cause interference or damage to sensitive equipment such as difficult drives, CRT televisions and monitors, besides as medical, scientiﬁc, and navigational devices. Keep this unit of measurement away from these products at all times.
Only use attachments/accessories speciﬁed by the manufacturer. This product is suitable for use in tropical and/or moderate climates.
No naked ﬂame sources, such equally lighted candles, should be placed on the apparatus.
Alert: To reduce the take a chance of ﬁre or electric shock, do not betrayal this product to pelting or wet
Do not dispose of batteries in the household trash or ﬁre.
The mains plug of power adaptor is used equally the disconnect device, it shall remain readily operable.
Clean only with dry cloth.
Attention should be drawn to the ecology aspects of bombardment disposal.

CAUTION – Danger of explosion if bombardment is incorrectly replaced. Replace but with the aforementioned or equivalent blazon.

Warning
Practice not ingest the battery, Chemical Burn Risk. This production contains a coin/push jail cell battery. If the coin/button cell battery is swallowed, it tin can cause severe internal burns in just 2 hours and can atomic number 82 to death. Keep new and used batteries away from children. If the battery compartment does not shut deeply, cease using the production and keep it away from children. If you think batteries might have been swallowed or placed within any function of the trunk, seek immediate medical attention.

FCC Data

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled surround. This equipment should exist installed and operated with minimum altitude 20cm between the radiator & your trunk.

This device complies with Part fifteen of the FCC Rules, operation is discipline to the post-obit 2 conditions:

This device may not crusade harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Alert: Changes or modiﬁcations to this unit non expressly approved by the political party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and establish to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and tin can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Notwithstanding, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or idiot box reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the post-obit measures:

Reorient or relocate the receiving antenna.
Increase the separation betwixt the equipment and receiver.
Connect the equipment into an outlet on a circuit unlike from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

IC Argument
This device contains licence-exempt transmitter(due south)/receiver(s) that comply with Innovation, Science and Economic Development Canada'southward licence-exempt RSS(s). Operation is bailiwick to the following two conditions:

This device may non cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

WARRANTY
For production support information and warranty please visit: www.ihome.com/back up

Ezoic

Documents / Resources

References